Amplifiers

Crown XTi4002 Amplifier Hire

Yes, I'm available to hire

There’s no debate — when you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. That’s because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a swea

\\ Request a Quote

Product Features

  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminium handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect™ control software
  • Increased number of presets to a total of 50; 49 of which are user definable
General

Channels: 2
Sensitivity: 1.4V
Rated Power Output (per channel): 1600W 2Ω, 1200W 4Ω, 650W 8Ω
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)
THD: < 0.5%
Frequency Response (at 1W, 20 Hz – 20 kHz): + 0 dB, -1 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB
IEC Power Connector: 15A

Physical & Dimensions

Height: 8.9cm
Width: 48.3cm
Depth: 31.1cm
Weight: 8.4 kg

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

Product Features

  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminium handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect™ control software
  • Increased number of presets to a total of 50; 49 of which are user definable
General

Channels: 2
Sensitivity: 1.4V
Rated Power Output (per channel): 1600W 2Ω, 1200W 4Ω, 650W 8Ω
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)
THD: < 0.5%
Frequency Response (at 1W, 20 Hz – 20 kHz): + 0 dB, -1 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB
IEC Power Connector: 15A

Physical & Dimensions

Height: 8.9cm
Width: 48.3cm
Depth: 31.1cm
Weight: 8.4 kg

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.