In-Ear Monitors

Sennheiser G4 In-Ear Monitor Hire

Yes, I'm available to hire

Full control over your performance – your direct link, everywhere, everyday. The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you.

  • 1 SR 300 G4 stereo transmitter
  • 1 EK 300 G4 stereo diversity receiver
  • 1 test earphones
  • 1 NT 2 power supply unit
  • 1 antenna

Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage.

\\ Request a Quote

Product Features

  • Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications
  • Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage
  • Half-rack stereo transmitter in a full-metal housing with OLED display for full control
  • Easy and flexible wireless synchronization between transmitter and receiver via infrared
  • Compatible with Sennheiser WSM control software for flexible frequency allocation
  • Up to 16 compatible channels
  • Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
  • Transmission Range: up to 100 meters / 300 feet
  • High RF output power (up to 30 mW) depending on country regulations
General

Modulation: Wideband FM stereo (MPX pilot tone)
Frequency ranges
GB: 606 – 648 MHz
Receiving frequencies
Max. 1680 frequencies, adjustable in 25 kHz steps
20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
6 frequency banks with up to 16 programmable channels
Switching bandwidth: up to 42 MHz
Nominal/peak deviation: ±24 kHz / ±48 kHz
MPX pilot tone (frequency/deviation): 19 kHz/±5 kHz
Frequency stability: ±10 ppm
Antenna output: BNC socket, 50 Ω
RF output power at 50 Ω switchable:
Low: typ. 10 mW
Standard: typ. 30 mW
High: typ. 50 mW
Compander system: Sennheiser HDX
AF frequency response: 25 Hz to 15 kHz
AF input BAL AF IN L (I) + MONO/ BAL AF IN R (II): 2x XLR-3/¼" (6.3 mm) jack combo socket, electronically balanced
Max. input level: +22 dBu
Total harmonic distortion (THD): <0.9 %
Signal-to-noise ratio (at nominal load and peak deviation): >90 dB
AF output LOOP OUT BAL L (I)/ LOOP OUT BAL R (II): ¼" (6.3 mm) stereo jack socket, balanced
Temperature range: -10 °C to +55 °C
Power supply: 12 V DC
Current consumption: max. 350 mA

Dimensions

Height: 43mm
Width: 212mm
Depth: 202mm
Weight: 980g

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

Product Features

  • Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications
  • Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage
  • Half-rack stereo transmitter in a full-metal housing with OLED display for full control
  • Easy and flexible wireless synchronization between transmitter and receiver via infrared
  • Compatible with Sennheiser WSM control software for flexible frequency allocation
  • Up to 16 compatible channels
  • Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
  • Transmission Range: up to 100 meters / 300 feet
  • High RF output power (up to 30 mW) depending on country regulations
General

Modulation: Wideband FM stereo (MPX pilot tone)
Frequency ranges
GB: 606 – 648 MHz
Receiving frequencies
Max. 1680 frequencies, adjustable in 25 kHz steps
20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
6 frequency banks with up to 16 programmable channels
Switching bandwidth: up to 42 MHz
Nominal/peak deviation: ±24 kHz / ±48 kHz
MPX pilot tone (frequency/deviation): 19 kHz/±5 kHz
Frequency stability: ±10 ppm
Antenna output: BNC socket, 50 Ω
RF output power at 50 Ω switchable:
Low: typ. 10 mW
Standard: typ. 30 mW
High: typ. 50 mW
Compander system: Sennheiser HDX
AF frequency response: 25 Hz to 15 kHz
AF input BAL AF IN L (I) + MONO/ BAL AF IN R (II): 2x XLR-3/¼" (6.3 mm) jack combo socket, electronically balanced
Max. input level: +22 dBu
Total harmonic distortion (THD): <0.9 %
Signal-to-noise ratio (at nominal load and peak deviation): >90 dB
AF output LOOP OUT BAL L (I)/ LOOP OUT BAL R (II): ¼" (6.3 mm) stereo jack socket, balanced
Temperature range: -10 °C to +55 °C
Power supply: 12 V DC
Current consumption: max. 350 mA

Dimensions

Height: 43mm
Width: 212mm
Depth: 202mm
Weight: 980g

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.