fbpx
Microphone & Di Boxes

Shure Beta 52A Microphone Hire

Yes, I'm available to hire

The Shure Beta 52A hire is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and “punch”, and delivers studio-quality sound even at extremely high sound pressure levels.

\\ Request a Quote

Shure Beta 52A Hire

The Shure Beta 52A hire features a modified super-cardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wears associated with touring.

 

Key Features:

  • Frequency response shaped specifically for kick drums and bass instruments
  • Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes the transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Specifications:

Type – Dynamic (moving coil)
Frequency Response – 20 to 10,000 Hz
Polar Pattern – Supercardioid, rotationally symmetrical about microphone axis
Output Level (at 1,000 Hz) – Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL
Impedance – Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z
Phasing – Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Maximum SPL- 174 dB at 1000 Hz (calculated)
Connector – Three-pin professional audio connector (male XLR type)
Case – Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille
Adjustable, Locking Stand Adapter – Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread
Net Weight – 605 grams (21.6 oz)

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

Shure Beta 52A Hire

The Shure Beta 52A hire features a modified super-cardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wears associated with touring.

 

Key Features:

  • Frequency response shaped specifically for kick drums and bass instruments
  • Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes the transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Specifications:

Type – Dynamic (moving coil)
Frequency Response – 20 to 10,000 Hz
Polar Pattern – Supercardioid, rotationally symmetrical about microphone axis
Output Level (at 1,000 Hz) – Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL
Impedance – Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z
Phasing – Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Maximum SPL- 174 dB at 1000 Hz (calculated)
Connector – Three-pin professional audio connector (male XLR type)
Case – Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille
Adjustable, Locking Stand Adapter – Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread
Net Weight – 605 grams (21.6 oz)

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

You might also like