fbpx
Infrastructure & Dimmer Pack

Quad Pro-Dim 10 Hire

Yes, I'm available to hire

The Quad Pro-Dim 10 hire provides four channels of dimming or switching operation in a robust and portable package. With circuit breaker protection on each channel and CEE form input and output connectors, the pack is ideal for studio, marquee or location use.

\\ Request a Quote

The pack combines hard fired triacs with digital control technology to achieve complete dimming control with no minimum load constraints making it suitable for a wide range of dimming applications from incandescent lamps to motors and cold cathode lighting.

 Portable 4 channel dimming/switching pack with CEE form input and outputs

 Suitable for dimming control of incandescent, resistive, inductive/wound transformer loads, and most dimmable electronic transformers for low voltage or cold cathode lighting

 10 A per channel capability with C10 circuit breaker over current protection on each channel

 32A double pole isolator / circuit breaker limits total input current

 Optional RCBO earth leakage input supply protection

 Local level control on four 60mm sliders

 Internal 0-25% Preheat control

 DMX input on both XLR and RJ45 in and through sockets

 Thumbwheel bcd DMX address setting and DMX data LED

 

INPUT SUPPLY

Single phase connection – live, neutral and earth through 32 A double
pole circuit breaker.
Operating Voltage range 215 – 245 V ac, Frequency 46 – 64 Hz.
Electronics protected by 100 mA anti-surge 5 x 20 mm glass fuse.
32 A double pole circuit breaker.

OUTPUT SUPPLY

4 channels of either zero voltage switching or phase controlled
dimming.
Type C 10 A circuit breaker on all channels.
Rating 10 A rms per channel maximum.
Current rise time > 160 uS

CONTROL INPUTS

Merged DMX and analogue control inputs.
DMX control to USITT DMX 512 via XLR and RJ45
Analogue inputs via DIN sockets, 0 to +10 V input control range
(full range adjustable between 5 V and 25 V)

OPERATION

Use sliders on the front to set levels.Dimming or switching operation
individually selectable for each channel.
Preheat 0-25%.
Electronic ballast setting for electronic loads.
For correct operation and cooling, do not block vents or fan.
Always operate horizontally, whether on the feet or G clamps.
Start address from 1 to 511 settable on bcd switches.
If DMX input fails, last level is held indefinitely until DMX input
restored.
Test mode : DMX input disabled, and channels can be ind

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

The pack combines hard fired triacs with digital control technology to achieve complete dimming control with no minimum load constraints making it suitable for a wide range of dimming applications from incandescent lamps to motors and cold cathode lighting.

 Portable 4 channel dimming/switching pack with CEE form input and outputs

 Suitable for dimming control of incandescent, resistive, inductive/wound transformer loads, and most dimmable electronic transformers for low voltage or cold cathode lighting

 10 A per channel capability with C10 circuit breaker over current protection on each channel

 32A double pole isolator / circuit breaker limits total input current

 Optional RCBO earth leakage input supply protection

 Local level control on four 60mm sliders

 Internal 0-25% Preheat control

 DMX input on both XLR and RJ45 in and through sockets

 Thumbwheel bcd DMX address setting and DMX data LED

 

INPUT SUPPLY

Single phase connection – live, neutral and earth through 32 A double
pole circuit breaker.
Operating Voltage range 215 – 245 V ac, Frequency 46 – 64 Hz.
Electronics protected by 100 mA anti-surge 5 x 20 mm glass fuse.
32 A double pole circuit breaker.

OUTPUT SUPPLY

4 channels of either zero voltage switching or phase controlled
dimming.
Type C 10 A circuit breaker on all channels.
Rating 10 A rms per channel maximum.
Current rise time > 160 uS

CONTROL INPUTS

Merged DMX and analogue control inputs.
DMX control to USITT DMX 512 via XLR and RJ45
Analogue inputs via DIN sockets, 0 to +10 V input control range
(full range adjustable between 5 V and 25 V)

OPERATION

Use sliders on the front to set levels.Dimming or switching operation
individually selectable for each channel.
Preheat 0-25%.
Electronic ballast setting for electronic loads.
For correct operation and cooling, do not block vents or fan.
Always operate horizontally, whether on the feet or G clamps.
Start address from 1 to 511 settable on bcd switches.
If DMX input fails, last level is held indefinitely until DMX input
restored.
Test mode : DMX input disabled, and channels can be ind

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.