fbpx
Moving Light Profiles

Robe Pointe Hire

Yes, I'm available to hire

The Robe Pointe Hire is very bright and super-fast with a sharp parallel beam that cuts through the air and across video with ease.

It can project a static or rotating glass gobo to produce precision in-air and surface images with an even focal plane. Tight or at full 20 degree zoom, the output is crystal clear and brilliant. Add in either rotating, 6 way linear or 8 way circular, prisms to create wide reaching effects across any set.

\\ Request a Quote

Robe Pointe Hire

The robe pointe hire is a very bright and super-fast with a sharp parallel beam that cuts through the air and across video with ease.

It can project a static or rotating glass gobo to produce precision in-air and surface images with an even focal plane. Tight or at full 20 degree zoom, the output is crystal clear and brilliant. Add in either rotating, 6 way linear or 8 way circular, prisms to create wide reaching effects across any set.Drop in the frost filter and use any of the 13 rich colours to create a smooth even wash. The Pointe has an output far greater in size, quality and power than seems possible from it’s small, lightweight body – due to the efficient short arc 280 W discharge source and the Robe optical configuration. This new technology fixture even travels efficiently in a case of 4 and will cover all your needs – Beam, Spot, Wash, FX – there is no point in using any other fixture.

Information

Source
Lamp: Discharge short arc lamp with integrated reflector
Approved model: Osram Sirius HRI 280 W RO
Lifetime: Standard mode (280 W) – 2.000 hrs, Eco mode (230 W) – 3.000 hrs
CRI: 75
CCT: 7000 K
Control: Automatic and remote on/off
Ballast: Electronic

Optical System
Robe’s proprietary optical design
Zoom range:
– 2.5°-10° beam application
– 5° – 20° spot application
Output lens diameter: 110 mm
Fixture total lumen output:
– Beam mode: 9.870 lm
– Spot mode: 5.150 lm
Light output:
– Beam mode: 82.400 lx @ 20 m
– Spot mode: 90.000 lx @ 5 m

Dynamic Effects
Colour wheel: 13 dichroic filters + white
Rotating Gobo wheel: 9 rotating, indexable and replaceable "SLOT&LOCK" glass gobos + open
Static Gobo wheel: 14 gobos + open
Prism 1: 8-facet circular prism rotating in both directions at different speeds
Prism 2: 6-facet linear prism rotating in both directions at different speeds
Frost effect: Separate, variable
Motorized zoom and focus
Pre-programmed random strobe & pulse effects
Dimmer: 0 – 100%

Control & Programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC
3-editable programs, each up to 100 steps
Stand-alone operation
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
Wireless CRMX™ technology from Lumen Radio: On request
DMX Protocol modes: 3
Control channels: 24, 16, 30
Pan/Tilt resolution: 8 or 16 bit
Colour wheel positioning: 8 or 16bit
Rotating gobo wheel positioning: 8 bit
Gobo indexing & rotation: 8 or 16bit
Static gobo wheel positioning: 8 bitt
Frost: 8 bit
Zoom: 8 or 16bit
Focus: 8 or 16bit
Dimmer: 8 or 16bit

Movement
Pan movement: 540°
Tilt movement: 270°
Controllable speed of Pan/Tilt movement

Rotating Gobos
Glass gobos: 9 rotating gobos
Outside diameter: 15.9 mm
Image diameter: 12.5 mm
Thickness: 1.1 mm
High temperature borofloat or better glass
"SLOT&LOCK" system for easy replacement of gobos

Static – Beam & Gobos
Aluminium wheel with fixed gobos: 10 gobos & 4 beam reducers

Thermal Specification
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 90°C (194°F)

Electrical Specification & Connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: 470 W at 230 V / 50 Hz
Power in connector: Neutrik powerCON
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in/out: RJ45
Physical

Weight 15 kg
Height: 575 mm (22.6") – head in vertical position
Width: 364 mm (14.3")
Depth: 250 mm (9.8")

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

Robe Pointe Hire

The robe pointe hire is a very bright and super-fast with a sharp parallel beam that cuts through the air and across video with ease.

It can project a static or rotating glass gobo to produce precision in-air and surface images with an even focal plane. Tight or at full 20 degree zoom, the output is crystal clear and brilliant. Add in either rotating, 6 way linear or 8 way circular, prisms to create wide reaching effects across any set.Drop in the frost filter and use any of the 13 rich colours to create a smooth even wash. The Pointe has an output far greater in size, quality and power than seems possible from it’s small, lightweight body – due to the efficient short arc 280 W discharge source and the Robe optical configuration. This new technology fixture even travels efficiently in a case of 4 and will cover all your needs – Beam, Spot, Wash, FX – there is no point in using any other fixture.

Information

Source
Lamp: Discharge short arc lamp with integrated reflector
Approved model: Osram Sirius HRI 280 W RO
Lifetime: Standard mode (280 W) – 2.000 hrs, Eco mode (230 W) – 3.000 hrs
CRI: 75
CCT: 7000 K
Control: Automatic and remote on/off
Ballast: Electronic

Optical System
Robe’s proprietary optical design
Zoom range:
– 2.5°-10° beam application
– 5° – 20° spot application
Output lens diameter: 110 mm
Fixture total lumen output:
– Beam mode: 9.870 lm
– Spot mode: 5.150 lm
Light output:
– Beam mode: 82.400 lx @ 20 m
– Spot mode: 90.000 lx @ 5 m

Dynamic Effects
Colour wheel: 13 dichroic filters + white
Rotating Gobo wheel: 9 rotating, indexable and replaceable "SLOT&LOCK" glass gobos + open
Static Gobo wheel: 14 gobos + open
Prism 1: 8-facet circular prism rotating in both directions at different speeds
Prism 2: 6-facet linear prism rotating in both directions at different speeds
Frost effect: Separate, variable
Motorized zoom and focus
Pre-programmed random strobe & pulse effects
Dimmer: 0 – 100%

Control & Programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC
3-editable programs, each up to 100 steps
Stand-alone operation
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
Wireless CRMX™ technology from Lumen Radio: On request
DMX Protocol modes: 3
Control channels: 24, 16, 30
Pan/Tilt resolution: 8 or 16 bit
Colour wheel positioning: 8 or 16bit
Rotating gobo wheel positioning: 8 bit
Gobo indexing & rotation: 8 or 16bit
Static gobo wheel positioning: 8 bitt
Frost: 8 bit
Zoom: 8 or 16bit
Focus: 8 or 16bit
Dimmer: 8 or 16bit

Movement
Pan movement: 540°
Tilt movement: 270°
Controllable speed of Pan/Tilt movement

Rotating Gobos
Glass gobos: 9 rotating gobos
Outside diameter: 15.9 mm
Image diameter: 12.5 mm
Thickness: 1.1 mm
High temperature borofloat or better glass
"SLOT&LOCK" system for easy replacement of gobos

Static – Beam & Gobos
Aluminium wheel with fixed gobos: 10 gobos & 4 beam reducers

Thermal Specification
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 90°C (194°F)

Electrical Specification & Connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: 470 W at 230 V / 50 Hz
Power in connector: Neutrik powerCON
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in/out: RJ45
Physical

Weight 15 kg
Height: 575 mm (22.6") – head in vertical position
Width: 364 mm (14.3")
Depth: 250 mm (9.8")

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.

  • DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

You might also like