The Cameo OTOS W3 is a compact IP65 wash moving head from the Cameo OTOS series, built for outdoor concert and festival stages, TV broadcast and corporate events. Seven 50W RGBL LEDs drive a 4-60° motorised zoom, with single pixel control, a controllable FX LED effect ring and built-in W-DMX and CRMX wireless. Dry hire and rental from moving lights at STLS.
Specs At A Glance
| Fixture Type | IP65 LED wash moving head |
|---|---|
| Light Source | 7x 50W RGBL LEDs (Red, Green, Blue, Lime) |
| Luminous Flux | 4,000 lumens |
| Beam Angle | 4° to 60° motorised zoom |
| CCT Range | 1,800 – 10,000 K with halogen redshift / DTW |
| CRI | Greater than 85 |
| DMX Modes | 10 modes, 16-bit dimmer resolution |
| Control | DMX, RDM, Art-Net, sACN, W-DMX, CRMX (wireless transceiver) |
| Movement | Pan 630°, Tilt 240° |
| IP Rating | IP65 (full weatherproof) |
| Power | 350W, TRUE1 in/out, 13A throughput |
| Weight | 11 kg |
| Dimensions | 308 x 230 x 380 mm |
What’s Included In Dry Hire
Each Cameo OTOS W3 hire comes in its matching flight case insert with mains lead (TRUE1), mounting bracket, hook clamp and safety bond. Add DMX cable, top loaders or weatherproof power runs to your order as needed.
Key Features
- IP65 fully weatherproof, safe for outdoor and damp environments
- 7x 50W RGBL LEDs deliver 4,000 lumens of vibrant colour
- RGB plus Lime LED engine for accurate skin tones and saturated colour
- 4° to 60° motorised zoom in a single zoom level
- Single Pixel Control across all 7 LEDs for chase, fan and matrix effects
- Controllable FX LED effect ring with white and full RGB colour control
- Dual Input Mode for efficient pixel mapping over DMX
- Built-in W-DMX and CRMX wireless transceiver (no extra receiver needed)
- Full Art-Net and sACN support for networked rigs
- Tunable white 1,800 to 10,000 K plus halogen redshift simulation
- Multiple cooling modes including silent for theatre and broadcast
- Pan 630° and Tilt 240° for wide stage coverage
Common Uses
Outdoor concert and festival main stages, brand activations, sports stadiums, TV broadcast and award shows, fashion shows, large corporate launches and any production where weatherproof colour mixing moving lights are needed. Especially well-suited to rental and outdoor hire jobs where IP65 protection matters.
Why Hire The Cameo OTOS W3?
The OTOS W3 is the most compact unit in the Cameo OTOS wash range. It gives you outdoor-rated colour mixing in an 11 kg fixture that’s easy to fly or ground stack, with wireless DMX built in so you can save on receivers. The RGBL engine punches above its weight on output, and the controllable effect ring opens up looks you can’t get from a standard wash mover.
OTOS W3 vs OTOS W6 vs OTOS W12
The Cameo OTOS series has three IP65 wash moving heads: the W3 (7 LEDs, single-level zoom), the W6 (16 LEDs, two-level zoom) and the W12 (32 LEDs, three-level multi-zoom). The W3 is the lightest and most cost-effective for rigs needing a lot of fixtures or smaller stages; the W6 and W12 step up output and zoom flexibility for bigger productions.
Similar Or Alternative Fixtures
Need different scale or a different brand? See our moving light range for Robe Spiider, Robe LEDBeam 200, Martin Mac Aura and other LED washes. For a desk to programme it, see lighting control hire for Chamsys MagicQ, ETC Eos and ChamSys QuickQ options with CRMX built in.
Frequently Asked Questions
How much does Cameo OTOS W3 hire cost?
Send us your dates, fixture count and venue and we’ll quote. Multi-day and multi-fixture discounts available.
How many DMX channels does the OTOS W3 use?
10 DMX control modes available, with 16-bit dimmer resolution. Modes range from a tight basic mode through to full pixel-control modes for matrix programming.
Is the OTOS W3 weatherproof?
Yes. IP65 rated, safe for outdoor and damp environments. Ideal for festivals, outdoor brand activations and stadium events.
What LED engine does the Cameo OTOS W3 use?
7x 50W RGBL (Red, Green, Blue, Lime) LEDs. The Lime emitter gives more accurate skin tones, warmer whites and more saturated yellow/green colour mixing than RGB-only fixtures.
Does the OTOS W3 have wireless DMX?
Yes. Built-in W-DMX and CRMX wireless transceiver. No external dongle or receiver needed. Pair it directly to a CRMX-equipped console (Chamsys MagicQ MQ80/250M, ETC Eos, Lumenradio TX) and you’re in control.
What’s the zoom range?
4° (tight beam) to 60° (wide wash), motorised. Useful for both aerial beam looks and broad colour washes from a single fixture.
How heavy is the Cameo OTOS W3?
11 kg. Light enough for one-person rigging and easy on ground-supported truss. Pair with a heavy-duty hook clamp and safety bond.
Can I power-link multiple OTOS W3 fixtures?
Yes. TRUE1 in and out with 13A max throughput, so you can daisy-chain typically 3-4 fixtures on a UK 13A circuit (350W per unit, check your local supply).
Does the OTOS W3 work with Art-Net and sACN?
Yes. Full Art-Net and sACN support over the RJ-45 data ports for networked rigs. RDM and standard DMX512 also supported.
What’s the difference between the OTOS W3 and the Robe Spiider?
The Cameo OTOS W3 is a lighter (11 kg vs 22 kg) IP65-rated wash mover with the controllable FX effect ring and built-in wireless. The Robe Spiider has the famous Flower Effect and a wider 4-50° zoom, but isn’t IP65 rated. Choose OTOS W3 for outdoor and weatherproof rigs; choose Spiider for indoor aerial effects.
Do you deliver to London and Surrey?
Yes. We’re based between London and Surrey and deliver UK-wide. Collect from our Surrey depot or we’ll deliver to your venue.
Hire The Cameo OTOS W3
Send us your dates, fixture count, venue and whether you need wireless DMX integration. We’ll confirm availability and quote. Collect from our Surrey depot or we’ll deliver to London, Surrey or anywhere UK-wide.
Get a quote or call us direct.