LED Lighting Hire

Martin Rush MH6 Wash Hire

Yes, I'm available to hire

The Rush MH 6 Wash hire is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed colour system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

\\ Request a Quote

Main Features

  • An exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom
  • Offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs
  • Also features a spectacular 10 degree – 60 degree zoom
  • Offers full electronic dimming, strobe effects and quiet operation
  • 2,000 lumen output
  • Single-lens wash with fully premixed color
Physical

Length: 290 mm (11.4 in.)
Width: 189 mm (7.4 in.)
Height: 360 mm (14.2 in.)
Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects

Color mixing: RGBW
Color presets: 36 color presets plus full white, ‘color wheel’ effects
Electronic dimming: 0 – 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Pan: 540°
Tilt: 200°

Control and Programming

Control options: DMX
DMX channels: 14
White balance control: RGB adjustment
16-bit fine control: Dimming, pan and tilt
DMX address setting: Control panel with LCD display
DMX compliance: USITT DMX512/1990

Optics

Light source: 12 x 10 W RGBW Osram Ostar LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 10° – 60° *Figure obtained under manufacturer's test conditions

Connections

AC power in/thru: Neutrik PowerCon
DMX data in/thru: 3-pin and 5-pin locking XLR

Electrical

AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Fuse: T 3.15 A
Recommended Miniature Circuit Breaker*: Type D
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.
  • Date Format: DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

Main Features

  • An exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom
  • Offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs
  • Also features a spectacular 10 degree – 60 degree zoom
  • Offers full electronic dimming, strobe effects and quiet operation
  • 2,000 lumen output
  • Single-lens wash with fully premixed color
Physical

Length: 290 mm (11.4 in.)
Width: 189 mm (7.4 in.)
Height: 360 mm (14.2 in.)
Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects

Color mixing: RGBW
Color presets: 36 color presets plus full white, ‘color wheel’ effects
Electronic dimming: 0 – 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Pan: 540°
Tilt: 200°

Control and Programming

Control options: DMX
DMX channels: 14
White balance control: RGB adjustment
16-bit fine control: Dimming, pan and tilt
DMX address setting: Control panel with LCD display
DMX compliance: USITT DMX512/1990

Optics

Light source: 12 x 10 W RGBW Osram Ostar LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 10° – 60° *Figure obtained under manufacturer's test conditions

Connections

AC power in/thru: Neutrik PowerCon
DMX data in/thru: 3-pin and 5-pin locking XLR

Electrical

AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Fuse: T 3.15 A
Recommended Miniature Circuit Breaker*: Type D
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.
  • Date Format: DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.