LED Lighting Hire

Robe LED Beam 150 Hire

Yes, I'm available to hire

Robe Beam 150 Hire now available to hire. This beam need no introduction, the best things come in small packages, now with zoom included. Our LEDBeam 150 Hire is the answer with fast sweeping beams and a wide far-reaching quality wash in compact housing.

\\ Request a Quote

The spectacular zoom range of 3.8° to 60° uses an eminent custom-designed optical system, now equipped with Robe’s innovative lens coating technology which brings benefits such as  bright and clear lenses, no scratches or marks, higher light output  and longer intervals between cleaning. The unique LEDBeam 150 FW offers Fresnel-Wash type of light output for even smooth edges and better color homogenization.

Attractive colorful chases and smooth transitions are powered by a cluster of high power multichip 40W RGBW LEDs.

A highly optimized motorised control produces speedy pan and tilt movement. Besides intense strobing capabilities, both LEDBeam 150 and LEDBeam 150 FW also offer gentle 18-bit dimming, including Tungsten lamp effects.

  • LIGHT SOURCE

     

    7x 40W RGBW multichips

     

  • LIGHT OUTPUT

     

    2.842 lm, 12.200 lux @ 5m

     

  • ZOOM RANGE

     

    3,8° – 60°

Source

Light source type: 7x 40W RGBW multichips
LED life expectancy: min. 20.000 hours
Typical lumen maintenance: 70% @ 20.000 hours

Optical System

Robe’s proprietary optical design
Innovative lens coating technology (Patent pending)
High – efficiency zoom optical system, ratio: 15,5:1
Zoom range: 3,8° – 60°
Fixture total lumen output: 2.842 lm
Light output: 12.200 lx @ 5 m

Dynamic Effects

Colour mixing mode RGBW or CMY
Variable CTO: 2.700K – 8.000K
Virtual Colour Wheel: with 66 preset swatches
Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)
Motorized zoom
Pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 – 100%

Control And Programming

Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 40 steps)
Protocols: USITT DMX-512, RDM
Wireless CRMX™ technology from Lumen Radio (on request)
DMX Protocol modes: 2
Control channels: 22, 16
Pan/Tilt resolution: 8 or 16 bit
RGBW or CMY: 8 or 16 bit
Zoom: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Pan movement: 450°
Tilt movement: 228°
Movement control: Standard and Speed
Controllable speed of Pan/Tilt movement
Automatic Pan/Tilt position correction

Electrical Specification

Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: Max. 220 W
Power in/out connector: Neutrik powerCON in/out
DMX and RDM data in/out: Locking 5-pin XLR

Mechanical Specification

Height: 337 mm (13.3")
Width: 244 mm (9.6")
Depth: 149 mm (5.9")
Weight: 5.7 kg (12.6 lbs)
Ingress protection rating: IP20

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.
  • Date Format: DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.

The spectacular zoom range of 3.8° to 60° uses an eminent custom-designed optical system, now equipped with Robe’s innovative lens coating technology which brings benefits such as  bright and clear lenses, no scratches or marks, higher light output  and longer intervals between cleaning. The unique LEDBeam 150 FW offers Fresnel-Wash type of light output for even smooth edges and better color homogenization.

Attractive colorful chases and smooth transitions are powered by a cluster of high power multichip 40W RGBW LEDs.

A highly optimized motorised control produces speedy pan and tilt movement. Besides intense strobing capabilities, both LEDBeam 150 and LEDBeam 150 FW also offer gentle 18-bit dimming, including Tungsten lamp effects.

  • LIGHT SOURCE

     

    7x 40W RGBW multichips

     

  • LIGHT OUTPUT

     

    2.842 lm, 12.200 lux @ 5m

     

  • ZOOM RANGE

     

    3,8° – 60°

Source

Light source type: 7x 40W RGBW multichips
LED life expectancy: min. 20.000 hours
Typical lumen maintenance: 70% @ 20.000 hours

Optical System

Robe’s proprietary optical design
Innovative lens coating technology (Patent pending)
High – efficiency zoom optical system, ratio: 15,5:1
Zoom range: 3,8° – 60°
Fixture total lumen output: 2.842 lm
Light output: 12.200 lx @ 5 m

Dynamic Effects

Colour mixing mode RGBW or CMY
Variable CTO: 2.700K – 8.000K
Virtual Colour Wheel: with 66 preset swatches
Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)
Motorized zoom
Pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 – 100%

Control And Programming

Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 40 steps)
Protocols: USITT DMX-512, RDM
Wireless CRMX™ technology from Lumen Radio (on request)
DMX Protocol modes: 2
Control channels: 22, 16
Pan/Tilt resolution: 8 or 16 bit
RGBW or CMY: 8 or 16 bit
Zoom: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Pan movement: 450°
Tilt movement: 228°
Movement control: Standard and Speed
Controllable speed of Pan/Tilt movement
Automatic Pan/Tilt position correction

Electrical Specification

Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: Max. 220 W
Power in/out connector: Neutrik powerCON in/out
DMX and RDM data in/out: Locking 5-pin XLR

Mechanical Specification

Height: 337 mm (13.3")
Width: 244 mm (9.6")
Depth: 149 mm (5.9")
Weight: 5.7 kg (12.6 lbs)
Ingress protection rating: IP20

Let's get planning

If you're interested in hiring this piece of equipment, please request a quote by using the form below so we can check your requirements against our lead times, or speak to a member of our team on 02083 964 207.
  • Date Format: DD slash MM slash YYYY
    This form collects your name, email address and telephone number so that we can contact you regarding your enquiry. Our Privacy Policy will provide further information on how this data is managed.
  • This field is for validation purposes and should be left unchanged.