The d&b audiotechnik V10P is a 2-way passive point source loudspeaker from the d&b V-Series. Pole-mountable, fly-rigged or ground-stacked, the V10P delivers high SPL with the trademark d&b coherent coverage and natural response. Ideal as front-of-house tops, side fills or stage monitors. Dry hire from passive speakers at STLS.
Specs At A Glance
| Type | 2-way passive point source loudspeaker |
|---|---|
| Drivers | 10″ LF + 1.4″ HF compression driver |
| Dispersion | 80° x 40° (rotatable horn) |
| Frequency Response | 59 Hz – 18 kHz |
| Max SPL | 138 dB peak |
| Power Handling | 500W AES (10ms peak) |
| Recommended Amp | d&b D20 or D80 amplifier with V10P preset |
| Weight | 17 kg |
What’s Included In Dry Hire
Each V10P hire comes with the cabinet, NL4 speakon cables and PAT certificate on request. Matched d&b D20 or D80 amplifier with the correct V10P preset loaded available as a paired hire. Fly hardware and rigging accessories on request.
Key Features
- Compact 2-way point source design with high SPL output
- 10 inch low frequency driver with 1.4 inch HF compression driver
- Rotatable 80° x 40° horn (orientation swap for FOH vs monitor use)
- Tight, focused dispersion ideal for theatre and live music
- Pole-mountable on M20 fittings, fly-able or ground-stackable
- Pair with d&b D20 or D80 amps with V10P preset loaded
- Coherent coverage across the V-Series for arrayed installs
- Touring-grade build with NL4 speakon connections
Common Uses
Front-of-house tops for mid-size venues and gigs, stage monitors (rotate the horn), side fills, theatre tops, festival side stages, corporate AV and broadcast. Use as a standalone pair for under-500 cap rooms or combined with V-SUB / B22 for full-range work.
Similar Or Alternative Speakers
Need bigger or different coverage? See our passive speaker range for d&b Y-series, KSL line array, plus L-Acoustics Kara and K2. Need active speakers instead? See active speaker hire.
Frequently Asked Questions
What amp do I need for the V10P?
Pair the V10P with a d&b D20 or D80 amplifier with the V10P preset loaded. The amp is what gives the cabinet its tuning and limiter protection.
Can the V10P be used as a stage monitor?
Yes. The 80° x 40° horn is rotatable, so the cabinet works as a monitor wedge on its side, or upright as an FOH top.
What’s the dispersion of the V10P?
80 degrees horizontal by 40 degrees vertical. The horn is field-rotatable to swap to 40° x 80° if you need taller coverage.
How many V10Ps do I need?
A pair covers most rooms up to 500 cap as standalone tops. For bigger venues, pair with V-SUB / B22 for low end, or use the V-Series in array for larger coverage.
Is the V10P pole-mountable?
Yes. M20 pole socket fitted. Can also be fly-rigged with d&b fly-bar accessories or ground-stacked on V-SUBs.
What’s the maximum SPL?
138 dB peak. Plenty of output for mid-size venues, even with substantial low end from paired subs.
Hire The d&b V10P
Send us your dates, venue size and intended use. We’ll spec the right amp pairing and quote. Collect from our Surrey depot or we’ll deliver UK-wide.
Get a quote or call us direct.
